Product Details

Fender FM65DSP and Super-Champ XD Footswitch

Place of Origin USA
Model Number CUSTOMGUITAR 255
Min.Order Quantity One Set
Price Negotiable
Packaging Details Hardshell Case of Fender FM65DSP and Super-Champ XD Footswitch
Delivery Time Please contact customer service
Payment Terms paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
Supply Ability 255

Product Features

This two-button footswitch will enable you to select your amp channel or turn amp effects on and off on Fender FM65DSP and Super-Champ XD amps. Whether you're ordering a replacement or adding flexibility to your amp, your satisfaction is guaranteed. 1/4" plug.

Two-button footswitch

Custom Guitar's Friend Gold Coverage

Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.

Gold Coverage Includes:

Unexpected and unintentional spills, drops and cracks Normal wear and tear Power surges Dust, internal heat and humidity

Other plan features include:

For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks) For products under $200 experiencing the above failures, a Custom Guitar's Friend gift card will be issued for the full price of the product + tax. Shipping fees covered if required for repair or replacement Plans are transferable in the event merchandise is sold Plans are renewable on new gear

*Limitations and exclusions apply. See terms and conditions for program details

Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.

Displaying reviews 1-10

Back to top

PreviousNext »

Well built, with cable,two switch, one switches from channel one, that would be the clean channel, to channel 2 that can be anything you set it for and back. The other shuts off effects on channel two(reverb,chorus,delay etc) but not the amp choice or (voice)tweed, blackface,british, etc. Pretty handy set up. Before playing, the two volumes, channel one and channel two can be set even with each other or one lower then the other on the amp. Oh, and the Super Champ XD, one sweet tube amp, a bargian of the decade.
Fender FM65DSP and Super-Champ XD Footswitch
.This switch works great with my new Champion 40 Amp. The LEDs work perfectly and the switch does
an excellent job.

I have not been able to find the actual footswitch that is specified for the New Fender Champion 40, so I purchased this one from Custom Guitar's Friend. This dual purpose foot switch requires just a regular 2 conductor guitar cord (not a special 3 conductor stereo cord), so the lack of a 12' cord in the box was not a problem for me. I believe that the design uses the light emitting diodes to separate the tasks between the channel switch and the on/off effects switch. Any regular guitar cord should work (my 25' cord works fine). The unit is well built and free shipping took only 4 days, including a weekend.
Fender FM65DSP and Super-Champ XD Footswitch
.This review is for the footswitch for the new Champion 40 amp. It came up as the same foot switch as the Champ amp, don't think they are the same, so be careful on this. The footswitch works fine, just like its supposed to, its too bad Fender just doesn't include it in the purchase, like the do on the 2X12 version, the 100. the part number for the new Champion 40 footswitch is: ASSY. P/N 0071359000.
Fender FM65DSP and Super-Champ XD Footswitch
.I got this footswitch to use with my Super Champ X2 and it works properly. The left button switches between channel 1 and 2, and the right button turns effects on and off. The effects button turns off both the primary effect and any virtual stomp boxes included via FUSE. If you set the effect(s) "bypass mode" switch to "input" using FUSE, when you turn off the effect via the footswitch you still get the "tail" of the effect (e.g. if you use a long reverb sound, once the switch turns off the effect you can still hear the reverb trail off until it decays into silence). The buttons do not generate switching pops or other detectable noise (though I run a lean, low-noise setup with no adaptor-powered pedals, so I can't speak to button noise issues in complicated setups with a bunch of power adaptors). The 2 LEDs are bright and visible under probably any stage conditions. There is no power required, the LEDs are operated through the low power coming through the connecting cable, which is just a regular instrument cable, a great feature.

As for construction, the casing is metal except the black sides, which are sturdy plastic. It seems to be well built. My only criticism of this unit is there are no rubber feet on the bottom, and since it is very light, it moves around a lot, even on carpet. I expect I will get some stick-on rubber feet from the hardware store and see if that keeps it in place better. If you gig with this switch, you will probably want some way to keep it secured from moving around. All in all though, very satisfied with this footswitch.
Fender FM65DSP and Super-Champ XD Footswitch
.This works Great with my Superchamp X2 head. Like being able to go from clean to dirty, and turn built-in Delay effect on and off as needed. Helps me get the most out of this Superchamp!
Fender FM65DSP and Super-Champ XD Footswitch
.Works as advertised. Switches channels and turns effects on an off. Pretty simple. You should note that it also works just as well with the newer Super Champ X2 model. It would make it easier for search engines to find it. Unlike other foot switches I've purchased, you have to use your own instrument cable to connect it to the amp. Not a big deal. I'm quite happy with it.
Fender FM65DSP and Super-Champ XD Footswitch
.Expected a cable with it. Did not get one. For the price I guess it really does not matter. Takes any regular guitar cable.
Fender FM65DSP and Super-Champ XD Footswitch
.Works perfectly. Made well.
Fender FM65DSP and Super-Champ XD Footswitch
.There isn't much to say other than it works perfect with the Super-Champ XD. It is pretty much the same as all other fender foot switches in build, weight and size.
Fender FM65DSP and Super-Champ XD Footswitch
.Works exactly how it's supposed to. Even has indicator lights for channel switching and effects.
Fender FM65DSP and Super-Champ XD Footswitch
.
Skype Contact Now