The DSR215 Active Loudspeaker features an ideal combination of advanced digital sound processing and the latest acoustic technologies for Integral Digital Tuning, plus 's D-CONTOUR (Dynamic-CONTOUR) multiband dynamic processing for Intelligent Dynamic Control. The DSR215 is loaded with 2 Class-D amplifiers with a PFC (Power Factor Correction) switching mode power supply. One amplifier delivers 850 watts to a premium grade 12" neodymium woofer with 3" voice coil, and a second amplifier supplies 450 watts to a large 2" high-purity titanium diaphragm, neodymium, high-frequency compression driver. A LTBD (Long Throw, Broad Dispersion) Constant Directivity Waveguide Horn spreads the sound across 90∞ x 60∞. The DSR215 has an impressive maximum SPL of 134dB peak.
FIR-X tuning
The digital crossover networks use high-order FIR (Finite Impulse Response) filters providing linear phase response. 's proprietary FIR-X tuning technology simultaneously optimizes frequency and phase response, whilst adjusting the time alignment between the HF and LF transducers. The end result is substantially higher sound quality than can be achieved with conventional analog crossovers. FIR-X tuning provides for the smoothest possible crossover transitions.
High Power DSP and 24-bit Discrete ADCs and DACs
All signals are precisely processed by a 48-bit internal processing, (76-bit accumulator), high-performance processor for optimum sound quality. The DSR Series speakers employ high-precision discrete ADCs and DACs with superior S/N ratio and dynamic range. The analog signal is transmitted on dual channels, converted to digital and summed inside the processor. By using this algorithm, an approximately 3dB improvement in S/N ratio was realized.
D-CONTOUR (Dynamic-CONTOUR)
The D-CONTOUR multiband dynamic processor constantly monitors the amplifier output levels and adjusts the control system. This in turn varies the amount of boost in each frequency band, providing an ideal balance of dynamic sound with consistent clarity at all volume levels. D-CONTOUR can be turned on or off depending on the acoustic environment and type of sound desired.
1300W (LF 850W, HF450W) High Power, High Sound Quality Class-D Amplifiers
's next-generation Class-D amplifiers deliver as much as 1300W of power with precision damping for tight and crisp sound from compact, lightweight modules. Through the ideal combination of amplifiers, transducers, and DSP, the DSR Series loudspeakers provide the highest levels of power in their class, while maintaining precise dynamics and sound reproduction. Efficiency is such that convection cooling is all that is necessary, eliminating the need for fans.
Full Resonance Switching Mode Power Supply with PFC (Power Factor Correction)
The DSR Series employs a -developed high-efficiency switching mode power supply with PFC. The full-resonance switching method uses both voltage resonance and current resonance, creating a clean power supply waveform with minimal high-frequency noise. PFC harmonizes the phases of the load current and power supply voltage, maximizing power output and ensuring stable operation under severe conditions. This clean, efficient power supply enables the entire speaker system to achieve its full performance potential.
3-Way Fail-Safe Protection
To ensure the highest possible reliability, the DSR Series employ many of the same protection functions used in 's top-class TXn Series professional power amplifiers. These functions protect all aspects of the power supply, power amplifier modules and transducers so that they can operate to their full potential while ensuring fail-safe operation even under the most severe conditions.
Note: The limited warranty on DSR-Series loudspeakers is extended to five years. In addition, all qualified DSR purchasers, thus far, are also retroactively covered by this extension, from the date of original sale.
Your live show deserves 's quality sound and reliability. Order today!
DSR215 Active Loudspeaker
Active LoudspeakersModel: DSR215
System Type: Dual 15" 2-way, Biamp Powered Speaker, Bass-reflex Type
Frequency Range (-10dB): 45Hz œ 20kHz
Frequency Response (-3dB): 55Hz œ 18kHz
Coverage Angle: H90-V60
CrossoLver Type: FIR-X tuning (linear phase FIR filter)
Crossover Frequency: 1.7kHz
Measured Maximum SPL (peak) IEC noise @ 1m: 138dB SP
Amplifier
Amplifier Type: Class-D
Power Rating: 1300W
Low-Frequency: 850W
High-Frequency: 450W
Cooling: Natural Convection
ControlsLEVEL control LINE/MIC switchHPF switchD-CONTOUR switchFRONT LED DISABLE switch, POWER switch
IndicatorsPEAK: x1 (Red) LIMIT:x1 (Red) PROTECTION:x1 (Red) POWER:x1 (Green) FRONT:x1 (White) HPF:x1 (Orange) D-CONTOUR :x1 (Orange)
HPF Frequency: 120Hz (-6dB) 24dB/oct
Boost Type: D-CONTOUR (Dynamic CONTOUR)
Protection
LoadPOWER switch on/off: MuteDC-fault: Power supply shuts down automatically (reset manually) Integral Power Protection: Limit the output (return automatically) Clip limiting
AmplifierThermal: Limit the output or Mute (return automatically) Output through current: Amplifier shuts down automatically (reset manually)
Power supplyThermal: Amplifier shuts down automatically (reset manually) Over voltage: Power supply shuts down automatically (reset manually)
ConnectorsInput: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) Output: XLR-3-32 x1 (Balanced), Parallel connection with INPUTPower: AC inlet x1
Power Consumption (1/8 Power):140W
Transducers
Low-Frequency: 2 x 15" cone
Magnet: Neodymium Magnet
Voice Coil: 2.5" diameter
High-Frequency: 2" Titanium diaphragm compression driver
Magnet: Neodymium Magnet
EnclosureDimension (W x H x D): 18-3/8" x 45-5/8" x 20-4/8", (467 x 1158 x 520mm) Weight: 110 lb., (49.8 kg) Externals Finish, Color: LINE-X, BlackGrille: 16-gauge matte black powdercoated perforated steel grilleMetal Handle: 2-piece (Side Board)
Input characteristics
MIC/LINE switch: LINE
Input Sensitivity: LEVEL position: maximum: 0dBu, LEVEL position: center (12 o'clock): +7dBu
Maximum Input Level: +24dBu
Input Impedance: 12kÎ
MIC/LINE switch: MIC
Input Sensitivity (LEVEL position): maximum: -25dBu
Maximum Input Level: -11dBu
Input Impedance: 8kÎ
Custom Guitar's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
Unexpected and unintentional spills, drops and cracks Normal wear and tear Power surges Dust, internal heat and humidityOther plan features include:
For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks) For products under $200 experiencing the above failures, a Custom Guitar's Friend gift card will be issued for the full price of the product + tax. Shipping fees covered if required for repair or replacement Plans are transferable in the event merchandise is sold Plans are renewable on new gear*Limitations and exclusions apply. See terms and conditions for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.
Displaying review 1
Back to top
We have a pair of these as the mains for our 6 piece rock band. We went with these to avoid having to get separate subs. We mic or DI everything into the board including bass & conga/roto toms. Our bass player only has a small amp for stage monitoring so we rely heavily on the mains for bass to the house. No problem. Excellent premium quality sound and lots of volume. We recently played in a 33000 sq ft room with 30 foot ceilings to a crowd of 800 and easily filled the room. Highly recommended. Only downside is that does not yet make covers for this line of speakers.Yamaha DSR215 Active Loudspeaker
.